Dan, Is there any way we can get the capability to change the synth/instrument (i.e. MIDI port and channel) being used on a particular stave? Dave ----- Original Message ----- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: December 16, 2008 6:54 AM Subject: [sib-access] Re: Accessing mixer I've done a lot of work on the mixer in beta 2. The features which you can access are largely unchanged but the interface is much easier and more stable. Dan Rugman visit the new on-line resource for visually impaired musicians and home of Sibelius Access. www.musicaccess.co.uk -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: 30 November 2008 14:58 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] Re: Accessing mixer Yes, pressing Ctrl-M will bring up the mixer dialog, but it's not easy to navigate. Please first read the milestone.doc file posted to the web site before using it. The mixer is limited in what we can do at this point. http://www.musicaccess.co.uk/index.htm Dave ----- Original Message ----- From: "Chris Google Goodwin" <cands.goodwin@xxxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Sunday, November 30, 2008 7:54 AM Subject: [sib-access] Accessing mixer Hi all, Do the scripts provide any access to the mixer window? In particular I want to solo a stave and increase the volume of an instrument in a multistave piece. The manual says there are buttons for muting and soloing a stave, and volume sliders for each instrument, but they all seem to be used with the mouse. Thanks, Chris If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx