I just opened the box and the cat was dead, does that count as an alarm?
Speaking of Heizenberg, using the FPGA to (non-invasively) measure the
environment experienced by the FPGA sounds brilliant in my book.
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Scott McMorrow
Sent: Thursday, June 6, 2019 2:28 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] test
This is only a test.
If this had been a real message you would have heard warning and klaxon
alarms.
Scott McMorrow, CTO Signal Integrity Group Samtec Office 401-284-1827 |
+1-800-726-8329 www.samtec.com<http://www.samtec.com/>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
