[SI-LIST] acceptable difference range for diff. pair
- From: "orech maagal" <pcb-design@xxxxxxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 16 Feb 2012 18:03:14 +0200
Hello
although it would be line-parameters dependant - What Is the common minimal
acceptable error range between 2 diff. pair?
few mils is probably not enough because it is beyond possible manufacture.
thanks
D. mosco
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
