Yes. You should update HyperLynx to 8.0, the latest release. -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Rama Mohan Reddy Boreddy Sent: Friday, December 18, 2009 10:06 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] XAUI/PCIe/SATA/HDMI simulations using HyperLynx Hi, Previously I have used Hyper Lynx 7.7 for SI Analysis to simulate DDR2 SDRAM which operates at 133 MHz. For current project, i need to simulate high speed interfaces such as XAUI/PCIe/SATA/HDMI. Please let us know whether HyperLynx supports this high speed interfaces. Regards, Rama ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu