This is a nice option. Another option is the have the relay company do this
work, specifying to them the material you're going to use, and the stack-up and
let them give you the pad dimensions, and s-parameters.
You're using surface mount correct?
-Lyndell Lee Asbenson
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On ;
Behalf Of C.C. Hwang
Sent: Friday, August 5, 2016 6:39 PM
To: arpitapaul97@xxxxxxxxx
Cc: Orin Laney <olaney@xxxxxxxxx>; si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: VNA measurement on RF relay switch
Hi Arpita,
You can try In-Situ De-embedding (see http://ataitec.com/si_measurement).
Ching-Chao Huang
On Fri, Aug 5, 2016 at 3:35 PM, Arpita Paul <arpitapaul97@xxxxxxxxx> wrote:
Hello Orin, Lyndell and Tom------------------------------------------------------------------
Thanks for your response.Sorry for not giving details. I need to de-embed the
switch matrix system for my measurements at 6G and above. So trying to find a
methodology and asking experts recommendation.
Regards
Arpita
On Aug 5, 2016, at 3:05 PM, Orin Laney <olaney@xxxxxxxxx> wrote:
Are you sure a TDR wouldn't be a better choice? And given the high isolation
between relay drive and signal paths, what "relay effect" are you referring
to?
Orin
On Fri, Aug 5, 2016 at 2:32 PM, arpita paul <arpitapaul97@xxxxxxxxx> wrote:
Hi All
I need to do some VNA measurements on 6 pole relay switch. But I
think I cannot do it at power on condition, the relay effect will
overshadow the original behavior. Is there any thought how I can do it?
Thanks.
Regards
Arpita
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject
field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu