[SI-LIST] SFP Electrical Standard Compliance in Simulation
- From: edward kowal <kowal_edward2007@xxxxxxxxxxx>
- To: SI LIST <si-list@xxxxxxxxxxxxx>
- Date: Wed, 2 Jul 2014 13:07:23 -0700
All,
I have a question about channel compliance for the SFP+ electrical standard.
In the spec, all I see is host compliance and module compliance. Am I correct
that there is no explicit end-to-end (chip-to-chip) channel compliance standard
masks then? In an application where there is not necessarily a module-host
distinction (or need to demonstrate compliance separately), then, am I free to
choose host/module compliance points as advantageously as possible from the
point of view of demonstrating compliance, or am I missing something more
fundamental in the spec in this regards?
Thanks in advance for the guidance,
Ed
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
