[SI-LIST] Ring Oscillator
- From: "navaram kumar" <knavaram@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Sun, 11 May 2008 11:46:16 +0530
Hi all
I am designing a ring oscillator , my problem is that the output frequency
of a practical ring oscillator may vary(say +/-5 % around the expected freq)
i.e i have to get afreq vs time plot to measure jitter, settling time
etc.But using Hspice i dont know how can i find the freq which may change
with time.The time period may differ from one cycle to the next in the
output, so i have to measure the period for every consecutive cycle for
about 1000 cycles.the only way i got to know is using 1000 .measure
statements. however i wish to know if there is abetter way of doing this?
Thanks &Regards
K.Navaram Kumar
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
