Hi Yanzhi, What temperture should I mark in the ibis model? 25 degree or 50 degree? -----邮件原件----- 发件人: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] 代表 Benny Yan 发送时间: 2010年3月22日 16:22 收件人: gezi; si-list@xxxxxxxxxxxxx 主题: [SI-LIST] Re: [inquiry] A question about the temperature keyword of ibis model Gezi, IBIS spec defines the temperature at die, so you should use 50 degree in this case. -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of gezi Sent: Monday, March 22, 2010 2:57 PM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] [inquiry] A question about the temperature keyword of ibis model I would like to ask a question about the temperature keyword of ibis model. Is the temperature ambient temperature or die temperature? For example, A device is used under room temperature 25 degree. Under this temperature, the die temperature is properly 50 degree. I would generate IBIS data from spice simulation. Will I use 50 degree to generate the ibis data? ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu