[SI-LIST] Re: 答复: Re: Power Supply Distribution/Filtering/Decoupling Guide

  • From: Chris Padilla <cpad@xxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx
  • Date: Tue, 06 Jan 2004 14:14:07 -0800

I don't know about everyone else but the only thing that came through on=20
that link was the title banner.  Everything else was a bunch of squares! :)

Chris Padilla
EMC Engineer
Cisco Systems
San Jose, CA

At 09:38 AM 1/6/2004 +0800, yu.yanfeng@xxxxxxxxxx wrote:
>Please don't talk about the water-type things. For power integrity in pcb,
>  I strongly recommend that everyone have a  read the post written by Mr.
>gogoin on http://www1.quanqiutong.com/index.php?showtopic=3D81295.
>Yanfeng Yu
>Sr. Engineer
>Nanjing R/D center, ZTE Corp.
>Gongqingtuan Road, Nanjing 210012
>Phone: 86-25-52872410
>Mobile :13505159475
>Mail: yu.yanfeng@xxxxxxxxxx
>
>
>
>
>
>Zhangkun <zhang_kun@xxxxxxxxxx>
>
>=B7=A2=BC=FE=C8=CB=A3=BA si-list-bounce@xxxxxxxxxxxxx
>2004-01-06 09:06
>=C7=EB=B4=F0=B8=B4 =B8=F8 zhang_kun
>
>         =CA=D5=BC=FE=C8=CB=A3=BA        hassan@xxxxxxxx,=
 si-list@xxxxxxxxxxxxx
>         =B3=AD=CB=CD=A3=BA
>         =B4=AB=D5=E6=D6=C2=A3=BA
>         =D6=F7=CC=E2=A3=BA  [SI-LIST] Re: Power Supply
>Distribution/Filtering/Decoupling Guide
>
>
>Dear Hassan:
>
>There are a lot of paper which is about power integrity. However, it is
>difficult to get some design guide line for the product PCB is very
>complex. There are some points to recommend:
>     1. Using thin dielectric
>     2. Using some caps of small capacitance and large ESR
>     3. When there is mixed-signal, the return path of VRM and digital
>signal should be cared.
>
>I hope this will be useful for you.
>
>Best Regards
>
>Zhangkun
>2003.1.6
>----- Original Message -----
>From: "Hassan O. Ali" <hassan@xxxxxxxx>
>To: <si-list@xxxxxxxxxxxxx>
>Sent: Tuesday, January 06, 2004 5:52 AM
>Subject: [SI-LIST] Power Supply Distribution/Filtering/Decoupling Guide
>
>
> > Could anyone recommend a definitive design guide for board-level power
>distribution,
> > filtering, and decoupling suitable for PCB's with multi-voltage,
>multi-gigabit, mixed-
> > signal devices?
> >
> > Thanks.
> >
> > Hassan.
> >
> > ------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
> >
> > or to administer your membership from a web page, go to:
> > //www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
> >
> > List technical documents are available at:
> >                 http://www.si-list.org
> >
> > List archives are viewable at:
> > //www.freelists.org/archives/si-list
> > or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages
> > Old (prior to June 6, 2001) list archives are viewable at:
> >   http://www.qsl.net/wb6tpu
> >
> >
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List technical documents are available at:
>                 http://www.si-list.org
>
>List archives are viewable at:
>                                  //www.freelists.org/archives/si-list
>or at our remote archives:
>
>http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
>                                  http://www.qsl.net/wb6tpu
>
>
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List technical documents are available at:
>                 http://www.si-list.org
>
>List archives are viewable at:
>                 //www.freelists.org/archives/si-list
>or at our remote archives:
>                 http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
>                 http://www.qsl.net/wb6tpu
>

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: