The typical selection yields results for nominal driver behavior. Nominal behavior is a good starting point for basic feasibility checks. Steve. chundi srikanth wrote: > Hi All, > Iam using Hyperlynx Boardsim tool. I have a query on this tool. There is > provision in the tool to select the IC modelling like slow-week,typical and > fast-strong modelling. So as far as my knowledge is concerned these > modellings vary on the basis of RC parasitics. I would like know whether my > assumption is correct? And generally which modelling we need to select and > what basis we need to select this for single-ended and differential > high-speed signal simulations. > > Thanks > Chundi > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > -- Steve Weir IPBLOX, LLC 150 N. Center St. #211 Reno, NV 89501 www.ipblox.com (775) 299-4236 Business (866) 675-4630 Toll-free (707) 780-1951 Fax ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu