Here is Mentor's response; SR #: 2468331137 SR Description: LineSim combines Power Net with GND To view or update your SR, click here: http://supportnet.mentor.com/servicerequests/detail.cfm?SR=2468331137&snw_source=EXT3B DR/ER #: 00884269, Prior DR/ER #: DR/ER Description: Power nets are connected and will be combined to single net message in LineSim decoupling wizard DR/ER Status: Postponed (For definitions see http://supportnet.mentor.com/help/er_request.cfm) DR/ER Customer Note: Review Queue: Not included in the functional themes for the next release. The next review cycle is scheduled for end of Q3 2012. Planned Release: Not Scheduled ________________________________________________________________________________________________ -----Original Message----- From: Ken Cantrell [mailto:ken@xxxxxxxxxxxxxxxx] Sent: Thursday, May 10, 2012 9:26 AM To: balaseven@xxxxxxxxx; epd2001usa@xxxxxxxxxxx Cc: mfilion@xxxxxxxxxxxxxxx; Jiang, George Q; si-list@xxxxxxxxxxxxx; manojkumarc@xxxxxxx Subject: RE: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" error with Hyperlinx 8.2 Has anyone contacted a Mentor AE? Perhaps they are aware of the problem, if it exists, and have a fix. Ken -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of bala Sent: Wednesday, May 09, 2012 8:42 PM To: epd2001usa@xxxxxxxxxxx Cc: mfilion@xxxxxxxxxxxxxxx; george.q.jiang@xxxxxxxxxx; si-list@xxxxxxxxxxxxx; manojkumarc@xxxxxxx Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" error with Hyperlinx 8.2 Manoj, Did u try this in cadence...if u get same error while using cadence also,then u ll come to know where the problem is...use sigrity otherwise... -bala On May 10, 2012 5:57 AM, "keithK EPD" <epd2001usa@xxxxxxxxxxx> wrote: > This is definitely a bug in translation of the *.hyp file you may be able > to edit this text file in a way which is a close approximation of what you > desire....obviously , a circle is not right > > > Keith Kowal > > www.product-designs.com > > > > > From: george.q.jiang@xxxxxxxxxx > > To: mfilion@xxxxxxxxxxxxxxx; manojkumarc@xxxxxxx > > CC: si-list@xxxxxxxxxxxxx > > Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" > error with Hyperlinx 8.2 > > Date: Wed, 9 May 2012 17:37:15 +0000 > > > > I have had same problem with HyperLynx. It is a defect of the tool. > > > > George Jiang > > Delphi Electronics & Safety > > Kokomo, IN 46902 > > > > -----Original Message----- > > From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] > On Behalf Of Marc-André Filion > > Sent: Wednesday, May 09, 2012 1:28 PM > > To: manojkumarc@xxxxxxx > > Cc: 'SI-LIST' > > Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" > error with Hyperlinx 8.2 > > > > Hi, > > I've recall having an issue with some special shape for mechanical > retention. I had a net0 that was shorting the power and GND in the > hyperlynx database. The board shape was a little special and the > translation convert it into a circle. This circle shorted many net > (including power and GND). I had to remove net0 from your .hyp database. In > my case, Hyperlynx was just shutting down. > > > > Maybe you should look at all unusual stuff on your board the could short > your power together. > > > > Regards, > > > > Marc-André Filion, ing > > Concepteur Matériel / Hardware Designer > > Brioconcept Consulting Inc. > > 450.681.2779 x2368 > > > > > > -----Original Message----- > > From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] > On Behalf Of Manojkumar Chidambaram - ERS, HCL Tech > > Sent: 9 mai 2012 13:04 > > To: SI-LIST (si-list@xxxxxxxxxxxxx) > > Subject: [SI-LIST] PI simulation "unrecoverable and unidentifiable" > error with Hyperlinx 8.2 > > > > Hi All, > > > > I am helping out one of my colleague for decoupling analysis with > hyperlynx 8.2. When tried simulating in boardsim few of the rails (1.8V, > VDD1, VDD2 > > rails) in the board reported an error pointing out that the error is > "unrecoverable and unidentifiable". > > > > The same power rails when exported to the Linesim had problems with > different nets merging together reported as "Net 1.8V and GND are connected > and will be combined to single net "GND_1.8V" > > But as per layout this net is clean. > > > > Is there anyone faced similar issue, please share your thoughts. Thanks! > > > > > > Thanks, > > Manoj > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > > **************************************************************************** ************ > Note: If the reader of this message is not the intended recipient, or an > employee or agent responsible for delivering this message to the intended > recipient, you are hereby notified that any dissemination, distribution or > copying of this communication is strictly prohibited. If you have received > this communication in error, please notify us immediately by replying to > the message and deleting it from your computer. Thank you. > **************************************************************************** ************ > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu **************************************************************************************** Note: If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. **************************************************************************************** ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu