[SI-LIST] Re: Loading CADSTAR layout in Specctraquest!
- From: Ray Anderson <reanderson@xxxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 01 Sep 2004 07:02:19 -0700
G.Srinivasan wrote:
>I have some layouts made in CADSTAR & ORCAD. Can I load them in
>Specctraquest? The openbook lists some s/w names only for importing third
>party logic but I didn't find anything for importing a board.
>
>
>
Since Cadence owns both the Orcad and Specctraquest products I would
suspect there is a path for connectivity. Don't know about Cadstar. I
think your local AE (Apps Engineer) from Cadence would be your primary
source of info on this question.
-Ray
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
