Mick. There are many RF design text that explore this in detail. The one I have been using is "Microwave Engineering - Passive Circuits" by Peter Rizzi Regards Chris "Zhou, Xingling (Xingling)" wrote: > Hi, > > Is there any information on characterizing isolation between differential > pairs 'quantitatively' ? > > Thanks. > > Mick > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > -- Chris Mesibov Sr. Hardware Engineer Fujitsu Network Communications, Inc. Phone:(845)731-2037 2 Blue Hill Plaza, 6th Floor Fax: (845)731-2011 Pearl River, NY 10965 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu