[SI-LIST] Re: I am using HFSS TDR and compare with Agilent TDR in measurement of a sliced via, I found usually HFSS has 2 or 3 ohm higher than Agilent, why?
- From: "Grasso, Charles" <Charles.Grasso@xxxxxxxxxxxx>
- To: "issue.lu@xxxxxxxxxxx" <issue.lu@xxxxxxxxxxx>, si-list <si-list@xxxxxxxxxxxxx>
- Date: Fri, 11 Jul 2014 18:03:31 +0000
Steve - If you have licenses for BOTH these products then the support teams for
Agilent and Ansys
would be delighted to help you.
Suggest you call your local AEs.
Best Regards
Charles Grasso
Compliance Engineer
Echostar Communications
(w) 303-706-5467
(c) 303-204-2974
(t) 3032042974@xxxxxxxxx
(e) charles.grasso@xxxxxxxxxxxx
(e2) chasgrasso@xxxxxxxxx
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of steve ham
Sent: Thursday, July 10, 2014 9:02 PM
To: si-list
Subject: [SI-LIST] I am using HFSS TDR and compare with Agilent TDR in
measurement of a sliced via, I found usually HFSS has 2 or 3 ohm higher than
Agilent, why?
I am using HFSS TDR and compare with Agilent TDR in measurement o= f a sliced
via, I found usually HFSS has 2 or 3 ohm higher than A= gilent, why?
****** From SIPI Exchange ******
(L= ink):http://localhost:50374/Question/Details?id=3D10230
(Ho= me Page):http://localhost:50374/Home/Index
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
