[SI-LIST] Re: Hyperlynx - Assigning Pins from ibis
- From: "Carrier, Patrick" <Patrick_Carrier@xxxxxxxxxx>
- To: "hitheshn@xxxxxxxxx" <hitheshn@xxxxxxxxx>, SI-List <si-list@xxxxxxxxxxxxx>
- Date: Wed, 29 Oct 2014 13:53:25 +0000
Hi Hithesh--
I would suggest assigning the model using a .ref file.
Please contact Mentor Support if you need further details.
--Pat
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Hithesh
Sent: Wednesday, October 29, 2014 4:32 AM
To: SI-List
Subject: [SI-LIST] Hyperlynx - Assigning Pins from ibis
I need some help with a particular IBIS model.
When I try to assign a Pin, I get the following message in Hyperlynx "Series
type models in file. C:\path may not be assigned interactively. Use .Ref file
model assignment instead"
The part is a demux IDT74CBTLV3257
Regards
-Hithesh
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
