Dear all In the current simulation, I meet one problem. When there is short transmission line in the netlist, the simulation is very slow. For example, in my netlist, there is the following sentence wline_trunk01 node1 vss rseries1 vss rlgcfile=sline_50.rlgc n=1 l=1800mil wline_trunk02 rseries2 vss stub_01 vss rlgcfile=sline_50.rlgc n=1 l=6500mil wline_trunk03 stub_01 vss stub_02 vss rlgcfile=sline_50.rlgc n=1 l=200mil wline_pull stub_02 vss pull vss rlgcfile=sline_50.rlgc n=1 l=200mil wline_stub01 nd_out_01a vss nd_out_01 vss rlgcfile=sline_50.rlgc n=1 l=200mil wline_stub02 nd_out_02a vss nd_out_02 vss rlgcfile=sline_50.rlgc n=1 l=200mil If the length of the wline_stub02 is set as 10mil, the simulation would become very slow. Could anybody tell me the reason. Best Regards Zhangkun 2005.4.7 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu