Ravinder, You can do this with the HyperLynx Touchstone editor included with HyperLynx SI/PI. You use the port reduction feature to reduce the matrix to the first set of 8 ports, and then again to reduce to the second set of 8 ports. Regards, Weston -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Ravinder.Ajmani@xxxxxxxxxxxxxx Sent: Thursday, September 22, 2011 1:53 PM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Conversion of .s16p file to two .s8p files Hi Experts, Are any tools available to convert a single Touchstone .s16p file to two .s8p files. Thanks. Regards, Ravinder Ajmani Server PCB Development Hitachi Global Storage Technologies Email: Ravinder.Ajmani@xxxxxxxxxxxxxx ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu