Hello, this is much appreciated and may serve as a good pointer for people getting started in signal integrity. I noticed one mistake in the text, in section 1.8 you talk about the knee frequency but formula (1-1) says 0.35/tau, which is the -3dB bandwidth of the signal. The knee frequency is 0.5/tau. Regards, Wolfgang V S <for_si2003@xxxxxxxxx> Sent by: si-list-bounce@xxxxxxxxxxxxx 03/11/2010 06:18 AM To si-list@xxxxxxxxxxxxx cc Subject [SI-LIST] Book Signal Integrity for PCB Designs available on net The book Signal Integrity is being made available at internet. Check out http://www.ezdia.com//Signal-Integrity-for-PCB-Designers/Content.do?id=1435 The complete book will be made available over a period of two weeks. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu