I should be done with the major stuff by this evening:
Done:
* Secured extension tube to focuser
* Zoom eyepiece secured w/ 2mm allen screws
* Epoxied front eyepiece element to eyepiece body (per instructions)
* Tied dust cover to aperture mask cover to support arm
* Tied eyepiece cover to finder scope
To do:
* Solder AA battery case to finderscope (replacing button battery)
* Smooth out azimuth movement a bit
* Instructions, probably laminated and/or spiral-bound?
* Fanny-pack or something similar to hold extra parts, instructions etc.
* Print and affix warning labels, ID placard, etc to base
* Attach handle to base.
Nick