Sanders: Did you push in the magazine knob after you turned it and it locked with loaded film? I'm also waiting for my SL 66 for the next week-end, I got one this morning with the Distagon 4/80 and Compur between the lens central shutter for flash shots faster than 1/30. Carlos 2010/5/29 Sanders McNew <sanders@xxxxxxxxx>: > Guys: I picked up an SL66 and am trying to make it work. > > Every time I try to load the camera, following the manual's > instructions, the magazine knob does not lock at frame 1 > and the film winds all the way through the magazine. The > magazine's film feeler seems to do its work -- the indicator > on the bottom lines up with the dot to show that the film is > loaded -- but the magazine knob's not locking. I am loading > with the shutter cocked, as per the manual. > > Is there something I am overlooking? Is this something that > requires the magazine to be rebuilt? > > I'd like to figure this out quickly so I can deal with my seller > so if anyone has an answer, sooner is better. > > Sanders > > > On May 27, 2010, at 1:06 AM, FreeLists Mailing List Manager wrote: > >> rollei_list Digest Wed, 26 May 2010 Volume: 06 Issue: 141 >> >> In This Issue: >> [rollei_list] Efke 25 film sheet, plates adapter and 3.5F >> [rollei_list] Re: Efke 25 film sheet, plates adapter and 3.5 >> >> ---------------------------------------------------------------------- >> >> Date: Wed, 26 May 2010 09:49:26 -0300 >> Subject: [rollei_list] Efke 25 film sheet, plates adapter and 3.5F >> From: CarlosMFreaza <cmfreaza@xxxxxxxxx> >> >> This is the first time I used Microdol X diluted 1+3, after to see >> that Microdol X full strength worked fine for Plus X 125 and that it >> did not work so fine for the Ilford Pan F ISO 50, I decided to try the >> Efke 25 6.5x9cm with Microdol X diluted 1+3, the next time I'll try >> adding two minutes for the developing time, these are the two samples >> taken withe the 3.5F Planar and the Rollei TLR plates adapter: >> >> http://www.flickr.com/photos/itarfoto/4641203161/ >> >> http://www.flickr.com/photos/itarfoto/4641202777/ >> >> Carlos >> >> ------------------------------ >> >> Date: Wed, 26 May 2010 11:39:12 -0300 >> Subject: [rollei_list] Re: Efke 25 film sheet, plates adapter and 3.5F >> From: CarlosMFreaza <cmfreaza@xxxxxxxxx> >> >> I did not mention it in my previous post, but I had already commented >> it, the results for the combo Tri X ISO 320 220 and Microdol X full >> strength were excellent too, as you could expect for a fine grain >> developer on medium and fast speed films.- >> Carlos >> >> 2010/5/26 CarlosMFreaza <cmfreaza@xxxxxxxxx>: >>> This is the first time I used Microdol X diluted 1+3, after to see >>> that Microdol X full strength worked fine for Plus X 125 and that it >>> did not work so fine for the Ilford Pan F ISO 50, I decided to try the >>> Efke 25 6.5x9cm with Microdol X diluted 1+3, the next time I'll try >>> adding two minutes for the developing time, these are the two samples >>> taken withe the 3.5F Planar and the Rollei TLR plates adapter: >>> >>> http://www.flickr.com/photos/itarfoto/4641203161/ >>> >>> http://www.flickr.com/photos/itarfoto/4641202777/ >>> >>> Carlos >>> >> >> ------------------------------ >> >> End of rollei_list Digest V6 #141 >> ********************************* >> --- >> Rollei List >> >> - Post to rollei_list@xxxxxxxxxxxxx >> >> - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' >> in the subject field OR by logging into www.freelists.org >> >> - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with >> 'unsubscribe' in the subject field OR by logging into www.freelists.org >> >> - Online, searchable archives are available at >> //www.freelists.org/archives/rollei_list >> > > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' > in the subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with > 'unsubscribe' in the subject field OR by logging into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list > > --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list