[rollei_list] Re: Minimum 'throw; for cable release to activate Rolleiflex shutter?
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <rollei_list@xxxxxxxxxxxxx>
- Date: Wed, 1 Nov 2006 08:14:12 -0800
----- Original Message -----
From: <chatanooga@xxxxxxxxx>
To: <rollei_list@xxxxxxxxxxxxx>
Sent: Wednesday, November 01, 2006 3:21 AM
Subject: [rollei_list] Minimum 'throw; for cable release to
activate Rolleiflex shutter?
Hi Folks
Any idea what this should be? - I have a cheapo (HAMA)
cable-release whose
plunger comes out by 1cm when fully depressed. Prior to
the CLA/ repair of
my 2.8fx it was fine however after a few frames on its
return the cable
release no longer seems to be able to trip the shutter....
I am unsure as to
whether the cable-release mysteriously 'lost' a few mm or
whether something
is no longer as it should be within the shutter-button of
the camera. (
Strangely, I can trigger the shutter by prodding the cable
through the
button opening but it just wont happen when the cable is
screwed in?)
rgds
Chat
I don't think the problem is the cable release. I am less
familiar with the F than older Rolleis so I don't know if
this applies, but, in the older cameras there is a pin in
the cable release socket that is acted on by the release and
in turn operates the tripping lever inside the camera. If
this pin is missing the cable release will not work
correctly. Its possible that it may have been lost during
the CLA.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
