The best thing to do is without a shadow of doubt, buy a rechargeable CR2
charger and batteries. I was getting through lots of these batteries in my
digital SLR until I discovered this solution.
Regards,
Marvin.
-----Original Message-----
From: rollei_list-bounce@xxxxxxxxxxxxx
[mailto:rollei_list-bounce@xxxxxxxxxxxxx] On Behalf Of Dirk-Roger Schmitt
Sent: Sunday, October 23, 2005 11:50 PM
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] CR 2 Batteries
Dear Folks,
I just got a flash which uses two CR 2 batteries.
Of course, that is nonsense and of course expensive if you use it a lot.
Has anybody an idea how to replace them by NiCd's or NiMH's?
In principle you need two NiCd's which both together are as long as the CR
2 in order to get the 3 Volts to replace one CR2.
Greetings
Dirk
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
__________ NOD32 1.1263 (20051021) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
