[rollei_list] Re: CD Sanding

  • From: John Saldanha <tyco@xxxxxxxxxxxx>
  • To: rollei_list@xxxxxxxxxxxxx
  • Date: Thu, 08 May 2008 08:39:33 +0200

A turn-table is a round platform with wheel below it allowing it to turn on its 
vertical axis.  Used by railway folk to turn around engines and carriages, and 
chinese restaurants in the centre of large tables so that the dishes could 
revolve around to the convenienience of each diner at the table. You must have 
seen a simpler execution in stereo systems? A very useful product. John
  ----- Original Message ----- 
  From: Peter K. 
  To: rollei_list@xxxxxxxxxxxxx 
  Sent: Wednesday, May 07, 2008 8:37 PM
  Subject: [rollei_list] Re: CD Sanding


  LOL. Thanks.


  On Wed, May 7, 2008 at 10:39 AM, <littlwing5@xxxxxxxxx> wrote:

    A record player.
    Sent via BlackBerry by AT&T


    -----Original Message-----
    From: "Peter K." <peterk727@xxxxxxxxx>

    Date: Wed, 7 May 2008 10:24:27
    To:rollei_list@xxxxxxxxxxxxx
    Subject: [rollei_list] Re: CD Sanding



    What's a turntable? ;-)



    On Wed, May 7, 2008 at 9:43 AM, Robert Lilley <54moggie@xxxxxxxxxxxxxx 
<mailto:54moggie@xxxxxxxxxxxxxx> > wrote:



    By the way, Novus is great for cleaning up turntable dust covers!
     
    Rob 
     
     
     


    ----------------


    From: rollei_list-bounce@xxxxxxxxxxxxx 
<mailto:rollei_list-bounce@xxxxxxxxxxxxx>  
[mailto:rollei_list-bounce@xxxxxxxxxxxxx 
<mailto:rollei_list-bounce@xxxxxxxxxxxxx> ] On Behalf Of Peter K.

     Sent: Wednesday, May 07, 2008 12:13 PM


     To: rollei_list@xxxxxxxxxxxxx <mailto:rollei_list@xxxxxxxxxxxxx>

     Subject: [rollei_list] Re: CD Sanding



     
    Nooooo. Don't sand it! Buy Novus Plastic polish #2. It will remove all the 
scratches. Novus makes some great polishes. There come in strengths, #s 1, 2, 
and 3. 1 is a light polish, #2 is the most often used. #3 is for heavy 
scratches. Great for anything plastic like watch crystals (plastic type), 
microwaveoven front panels, motorcycle windshield, etc.




    On Wed, May 7, 2008 at 1:49 AM, John Wild <JWild@xxxxxxxxxxxxxxxxxxxxxx 
<mailto:JWild@xxxxxxxxxxxxxxxxxxxxxx> > wrote:

    I have found that smearing washing-up liquid on a cd and rinsing in warm 
water often removes small 'unseen' marks which can prevent a disc from 
initially being read. This does not remove scratches but I have found that it 
does help in a lot of cases. For deeper scratches, I would guess jewelers rouge 
or plastic polishing compound applied gently on a polishing mop would work 
quite well.
     
    With reference to longevity last week: in 100 years, no one will know what 
a CD is other than a shiny plastic disc. A vinyl record will show as a disk 
with grooves. People will soon discover that by inserting a pin in a piece of 
paper, resting the pin on the disc and rotating the disc, sound will emanate. 
Ideal rotational speed would be easy to guess from the sounds. Similarly with 
film, it will be something which is easily deciphered. Magnetic media or CDs, 
with all the different formats, will be a challenge to understand.
     
    John

     

     

    ----------------


    From: rollei_list-bounce@xxxxxxxxxxxxx 
<mailto:rollei_list-bounce@xxxxxxxxxxxxx> 
[mailto:rollei_list-bounce@xxxxxxxxxxxxx 
<mailto:rollei_list-bounce@xxxxxxxxxxxxx> ] On Behalf Of Aaron Reece

     Sent: 06 May 2008 18:30

     To: rollei_list@xxxxxxxxxxxxx <mailto:rollei_list@xxxxxxxxxxxxx>

     Subject: [rollei_list] CD Sanding


     


    On May 5, 2008, at 11:26 AM, Don Williams wrote:



     I found a piece of 600 grit that had white on it, which would have been 
the material removed from the disks.  I don't remember whether I used it wet or 
dry but would think that it was wet.
     

    Interesting. I would have thought even 600 grit is too coarse, but what do 
I know? I wonder if the particles of plastic suspended in the water contribute 
to the polishing effect. I'll try this on a couple of unrecoverable CDs and 
report back. Thanks for the tip.

     

    -Aaron



     --
     Peter K
     Ó¿Õ¬


    --
    Peter K
    Ó¿Õ¬ 



  -- 
  Peter K
  Ó¿Õ¬ 

Other related posts: