[rollei_list] Re: 6000 pin order

I believe that back has its own motor.

s.d.




On Jan 27, 2007, at 5:20 AM, Neil Gould wrote:


Recently, you wrote:


From: David Restall - System Administrator <dave@xxxxxxxxxxx>

I think Neil has typoed here :-)


You're right!  Thanks for the correction.


From: Slobodan Dimitrov <s.dimitrov@xxxxxxxxxxx>

Thanks!
I bet 13 and 9 is for the 70mm back, which predates the Master
Control.


This is likely to be a case of a general design with multiple
applications, as the remote shutter/MLU switch also connects to this
socket and the MCU does draw its operating power from the camera. How is 
the 70mm back different from other backs w/r/t the film drive?

Neil



---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list



---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: