[racktables-users] Re: snmp sync fail to get any information
- From: Armin Foerster <Armin.Foerster@xxxxxxxxxx>
- To: racktables-users@xxxxxxxxxxxxx
- Date: Fri, 21 Oct 2011 12:02:01 +0200
hi there,
you can fill in the FQDN field with the ip-adress of your device. that
should work. if you are missing a sync tab, you may have filled in some
ports already. only if the information shown under the port tab is
completely empty, the snmp sync tab is accessible.
regards,
armin
racktables-users-bounce@xxxxxxxxxxxxx wrote on 21.10.2011 10:56:14:
> From:
>
> Nikolay Shopik <shopik@xxxxxxxxxx>
>
> To:
>
> racktables-users@xxxxxxxxxxxxx
>
> Date:
>
> 21.10.2011 10:57
>
> Subject:
>
> [racktables-users] snmp sync fail to get any information
>
> Sent by:
>
> racktables-users-bounce@xxxxxxxxxxxxx
>
> Hey,
>
> I'm having problem trying snmp sync device. So there is clearly problem
> with my configuration. For me it still not clear which IP address of
> device it will try pool or will it use some FQDN?
> Also some of my routers doesn't have SNMP sync tab at all.
>
>
Other related posts:
