[racktables-users] Re: Selecting multiple IP addresses
- From: Robert Parten <rparten@xxxxxxxxxxxx>
- To: "racktables-users@xxxxxxxxxxxxx" <racktables-users@xxxxxxxxxxxxx>
- Date: Fri, 9 Sep 2011 15:07:17 +0000
Hmmm, we aren't adding a network. Instead lets say we have a current /14 and
there are 200 machines we need to set their description to "Systems Engineering
Test ONLY" and the /14 is already there. We would not want to create an entire
network just for that.
Robert M Parten II
Network Engineer - iContact
919-757-4255(c)
919-926-3494 (o)
919-569-5502(h)
________________________________
"We can't solve problems by using the same kind of thinking we used when we
created them." ~ Albert Einstein
________________________________________
From: racktables-users-bounce@xxxxxxxxxxxxx
[racktables-users-bounce@xxxxxxxxxxxxx] on behalf of Jeroen ten Berge
[jeroentenberge@xxxxxxxxx]
Sent: Friday, September 09, 2011 9:24 AM
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] Re: Selecting multiple IP addresses
>2011/9/2 Robert Parten <rparten@xxxxxxxxxxxx>:
> Is there a patch (either from the community or perhaps this is a new feature
> request) where I can have someone select or type in a range of IP's and add
> a name to those ranges and then update the IPv4Network table with that
> information?
What's the difference with "Add network" ?
Regards,
Jeroen.
Other related posts:
