That's what I assumed. However, it is that way now. Parent--- Type: Server Hypervisor: Yes SW Type: VMWare ESXi 5.1U1 Child- Type: VM SW Type: Junos Space 13 Paperclip shows, but doesn't respond to a click. :-/ On 3/25/14, 8:54 PM, "Jonathan Barker" <jonathanbarker@xxxxxxxxxxxxxxxx<mailto:jonathanbarker@xxxxxxxxxxxxxxxx>> wrote: If you set your host server properties to "Yes" on the Hypervisor drop-down item you'll be able to add VM's to servers without any additional config. From: racktables-users-bounce@xxxxxxxxxxxxx<mailto:racktables-users-bounce@xxxxxxxxxxxxx> [mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen Steiner Sent: Tuesday, March 25, 2014 5:51 PM To: racktables-users@xxxxxxxxxxxxx<mailto:racktables-users@xxxxxxxxxxxxx> Subject: [racktables-users] Container issues Hello, I am struggling with building some virtual resources. In the container compatibility, I added VM as a child to Server. However, when I create a VM object and click on the paperclip, nothing happens. This seems to work fine using a Server Chassis parent and Server child, but my stare and compare to ensure the objects are configured the same has been fruitless thus far. Where should I look to verify my settings? Thanks, -steve