Hello Alexey, the output is the problem. I have tried with an other switch (HP 2810-48G), the output is different and the import of the ports works. snmpwalk 10.x.x.x1 -v2c -c public ifDescr IF-MIB::ifDescr.1 = STRING: 1 IF-MIB::ifDescr.2 = STRING: 2 IF-MIB::ifDescr.3 = STRING: 3 IF-MIB::ifDescr.4 = STRING: 4 IF-MIB::ifDescr.5 = STRING: 5 IF-MIB::ifDescr.6 = STRING: 6 IF-MIB::ifDescr.7 = STRING: 7 IF-MIB::ifDescr.8 = STRING: 8 IF-MIB::ifDescr.9 = STRING: 9 IF-MIB::ifDescr.10 = STRING: 10 IF-MIB::ifDescr.11 = STRING: 11 IF-MIB::ifDescr.12 = STRING: 12 IF-MIB::ifDescr.13 = STRING: 13 IF-MIB::ifDescr.14 = STRING: 14 IF-MIB::ifDescr.15 = STRING: 15 IF-MIB::ifDescr.16 = STRING: 16 IF-MIB::ifDescr.17 = STRING: 17 IF-MIB::ifDescr.18 = STRING: 18 IF-MIB::ifDescr.19 = STRING: 19 IF-MIB::ifDescr.20 = STRING: 20 IF-MIB::ifDescr.21 = STRING: 21 IF-MIB::ifDescr.22 = STRING: 22 IF-MIB::ifDescr.23 = STRING: 23 IF-MIB::ifDescr.24 = STRING: 24 IF-MIB::ifDescr.25 = STRING: 25 IF-MIB::ifDescr.26 = STRING: 26 IF-MIB::ifDescr.27 = STRING: 27 IF-MIB::ifDescr.28 = STRING: 28 IF-MIB::ifDescr.29 = STRING: 29 IF-MIB::ifDescr.30 = STRING: 30 IF-MIB::ifDescr.31 = STRING: 31 IF-MIB::ifDescr.32 = STRING: 32 IF-MIB::ifDescr.33 = STRING: 33 IF-MIB::ifDescr.34 = STRING: 34 IF-MIB::ifDescr.35 = STRING: 35 IF-MIB::ifDescr.36 = STRING: 36 IF-MIB::ifDescr.37 = STRING: 37 IF-MIB::ifDescr.38 = STRING: 38 IF-MIB::ifDescr.39 = STRING: 39 IF-MIB::ifDescr.40 = STRING: 40 IF-MIB::ifDescr.41 = STRING: 41 IF-MIB::ifDescr.42 = STRING: 42 IF-MIB::ifDescr.43 = STRING: 43 IF-MIB::ifDescr.44 = STRING: 44 IF-MIB::ifDescr.45 = STRING: 45 IF-MIB::ifDescr.46 = STRING: 46 IF-MIB::ifDescr.47 = STRING: 47 IF-MIB::ifDescr.48 = STRING: 48 IF-MIB::ifDescr.97 = STRING: DEFAULT_VLAN IF-MIB::ifDescr.4192 = STRING: HP ProCurve Switch software loopback interface So long. Christoph ----- Original Message ----- > From: "Christoph // 777-Systems N.V." <christoph@xxxxxxxxxxx> > To: racktables-users@xxxxxxxxxxxxx > Sent: Tuesday, May 10, 2011 9:26:11 AM > Subject: [racktables-users] Re: Can't add HP switch for snmp-port-finding > Hello Alexey, > > the output of 'snmpwalk 10.x.x.x -v2c -c public ifDescr' : > IF-MIB::ifDescr.1 = STRING: IP Interface > IF-MIB::ifDescr.101 = STRING: Port #1 > IF-MIB::ifDescr.102 = STRING: Port #2 > IF-MIB::ifDescr.103 = STRING: Port #3 > IF-MIB::ifDescr.104 = STRING: Port #4 > IF-MIB::ifDescr.105 = STRING: Port #5 > IF-MIB::ifDescr.106 = STRING: Port #6 > IF-MIB::ifDescr.107 = STRING: Port #7 > IF-MIB::ifDescr.108 = STRING: Port #8 > IF-MIB::ifDescr.109 = STRING: Port #9 > IF-MIB::ifDescr.110 = STRING: Port #10 > IF-MIB::ifDescr.111 = STRING: Port #11 > IF-MIB::ifDescr.112 = STRING: Port #12 > IF-MIB::ifDescr.113 = STRING: Port #13 > IF-MIB::ifDescr.114 = STRING: Port #14 > IF-MIB::ifDescr.115 = STRING: Port #15 > IF-MIB::ifDescr.116 = STRING: Port #16 > IF-MIB::ifDescr.117 = STRING: Port #17 > IF-MIB::ifDescr.118 = STRING: Port #18 > IF-MIB::ifDescr.119 = STRING: Port #19 > IF-MIB::ifDescr.120 = STRING: Port #20 > IF-MIB::ifDescr.121 = STRING: Port #21 > IF-MIB::ifDescr.122 = STRING: Port #22 > IF-MIB::ifDescr.123 = STRING: Port #23 > IF-MIB::ifDescr.124 = STRING: Port #24 > > Seems okay to me. > > So long. > Christoph > > ----- Original Message ----- > > From: "Alexey Andriyanov" <alan-74@xxxxxxx> > > To: racktables-users@xxxxxxxxxxxxx > > Cc: "Christoph // 777-Systems N.V." <christoph@xxxxxxxxxxx> > > Sent: Monday, May 9, 2011 6:52:49 PM > > Subject: Re: [racktables-users] Re: Can't add HP switch for > > snmp-port-finding > > What does return snmpwalk by ifDescr ? > > > > 09.05.2011 20:41, Christoph // 777-Systems N.V. пишет: > > > Hello World, > > > > > > I disabled all HP Mibs and activated all default Mibs. Than I > > > didn't > > > get the error messages anymore, but there are still no ports on > > > the > > > port tab. > > > Now I see 'SNMP: completed 'generic' work > > > SNMP: completed 'procurve-generic' work > > > SNMP: completed 'procurve-chassis-1000T' work' on the port tab, > > > but > > > no ports. > > > > > > Any idea? Thanks for your help. > > > > > > So long. > > > Christoph > > > > > > > > > > > > ----- Original Message ----- > > >> From: "Christoph // 777-Systems N.V."<christoph@xxxxxxxxxxx> > > >> To: racktables-users@xxxxxxxxxxxxx > > >> Sent: Monday, May 9, 2011 5:00:46 PM > > >> Subject: [racktables-users] Re: Can't add HP switch for > > >> snmp-port-finding > > >> I have turned off the OID translation in /etc/snmp/snmp.conf. Now > > >> I > > >> get 'Unknown OID 'OID: iso.3.6.1.4.1.11.2.3.7.11.65''. > > >> > > >> So long, > > >> > > >> Christoph > > >> > > >> > > >> ----- Original Message ----- > > >>> From: "Alexey Andriyanov"<alan-74@xxxxxxx> > > >>> To: racktables-users@xxxxxxxxxxxxx > > >>> Cc: "Christoph // 777-Systems N.V."<christoph@xxxxxxxxxxx> > > >>> Sent: Monday, May 9, 2011 4:27:15 PM > > >>> Subject: Re: [racktables-users] Can't add HP switch for > > >>> snmp-port-finding > > >>> Hello Christoph. > > >>> > > >>> Racktables does not expect that OID will be returned translated. > > >>> It > > >>> is > > >>> set numerically in the code, as you can see. So it compares > > >>> 'HP-ICF-OID::hpSwitchJ9028A' with '11.2.3.7.11.65', and gets no > > >>> luck. > > >>> > > >>> This certainly is a subject to fix, but for now you can get > > >>> round > > >>> of > > >>> this by hiding HP's SNMP MIBs from RT installation somehow. > > >>> > > >>> 09.05.2011 18:13, Christoph // 777-Systems N.V. пишет: > > >>>> Hello World, > > >>>> > > >>>> I have tried to add a HP J9028A 1800-24G switch to snmp.php, > > >>>> but > > >>>> I > > >>>> still get an 'Unknown OID 'OID: HP-ICF-OID::hpSwitchJ9028A'' on > > >>>> the > > >>>> SNMP sync tab. > > >>>> > > >>>> I am using RackTables 0.19.4 and Ubuntu 11.04 > > >>>> > > >>>> snmp.php: > > >>>> 798a799,804 > > >>>>> '11.2.3.7.11.65' => array > > >>>>> ( > > >>>>> 'dict_key' => 850, > > >>>>> 'text' => 'J9028A: 24 RJ-45/10-100-1000T(X)', > > >>>>> 'processors' => array > > >>>>> ('procurve-chassis-1000T'), > > >>>>> ), > > >>>> Can someone give me a hint, what's wrong? > > >>>> Thanks for your help, I am new to RackTables and a little lost > > >>>> with > > >>>> this problem. > > >>>> > > >>>> So long, > > >>>> Christoph > > >>>> > > >>>> > > >>>> > > >