All the PDU's are APC, but different models are laid out differently.
Why APC switched is anybody's guess. The last few we've gotten have the
outlets numbered 1-24 starting at the top. All the others start the
numbering at the bottom. All the PDU's get power from a whip on the top
of the rack so it's not feasible to flip them the other way.
On 12/29/2015 09:49 AM, Cary Abend wrote:
Different models/versions/manufacturers or installed upside down? :)
-----Original Message-----
From: racktables-users-bounce@xxxxxxxxxxxxx
[mailto:racktables-users-bounce@xxxxxxxxxxxxx] On Behalf Of Stephen Berg
(Contractor)
Sent: Tuesday, December 29, 2015 10:34 AM
To: racktables-users@xxxxxxxxxxxxx
Subject: [racktables-users] Can a PDU outlet list be inverted?
I've got PDU's that are numbered 1-24, some go top to bottom and some got bottom to top.
Was wondering if there's a way to have the "Ports and interfaces" tab show the
ports in ascending or descending order?
It's not a big deal but would help when I'm planning space for new equipment to
see it to match the physical layout.
--
Stephen Berg
Systems Administrator
NRL Code: 7320
Office: 228-688-5738
stephen.berg.ctr@xxxxxxxxxxxxxxx
NOTICE TO RECIPIENT: This email, including attachments, may contain information
which is confidential, proprietary, attorney-client privileged and/or
controlled under U.S. export laws and regulations and may be restricted from
disclosure by applicable State and Federal law. Nothing in this email shall
create any legal binding agreement between the parties unless expressly stated
herein and provided by an authorized representative of Comtech
Telecommunications Corp. or its subsidiaries. If you are not the intended
recipient of this message, be advised that any dissemination, distribution, or
use of the contents of this message is strictly prohibited. If you received
this message in error, please notify us immediately by return email and
permanently delete all copies of the original email and any attached
documentation from any computer or other media.
