[racktables-users] Address usage in IPv4 tree

From: Dennis Koster <DKoster@xxxxxxxx>
To: "racktables-users@xxxxxxxxxxxxx" <racktables-users@xxxxxxxxxxxxx>
Date: Wed, 29 Apr 2015 11:30:23 +0200

Dear List,

In older versions of RackTables, a small IPv4 space usages block was shown in
the IPv4 tree listing.
The kind you also see when clicking on an IP block.

[cid:image001.jpg@01D0826F.E1800A70]

After scanning the changelogs, I've found that this option was disabled in the
config.
And I should be able to re-enable it through the user interface configuration
option:

"IPV4_TREE_SHOW_USAGE
Show address usage in IPv4 tree"

However turning this on from "no" to "yes" doesn't do anything.
I've checked the only demo version to exclude any custom issues in my
installation and the demo does exact the same "nothing".

Any ideas ?
--
Met vriendelijke groet,
Dennis Koster
Hosting Specialist

[cid:image002.jpg@01D0826F.E1800A70]
Denit Hosting Solutions
Kabelweg 21
1014 BA Amsterdam
Telefoon: +31 (0)20 337 1801
Fax: +31 (0)20 337 1802
Internet: www.denit.nl<http://www.denit.nl/>
E-mail: dkoster@xxxxxxxx<mailto:dkoster@xxxxxxxx>
[cid:image003.jpg@01D0826F.E1800A70]<http://www.linkedin.com/company/113944>
[cid:image004.jpg@01D0826F.E1800A70] <http://www.twitter.com/denithosting>
[cid:image005.jpg@01D0826F.E1800A70]
<http://www.denit.nl/web/hosting/solutions/nieuwsbrief>

Follow-Ups:
- [racktables-users] Re: Address usage in IPv4 tree
  - From: Alexey Andriyanov

[racktables-users] Address usage in IPv4 tree

Other related posts: