From: racktables-users-bounce@xxxxxxxxxxxxx [mailto:racktables-users-
bounce@xxxxxxxxxxxxx] On Behalf Of Denis Ovsienko
Sent: Wednesday, July 13, 2016 18:44
The documentation on how to do it manually/offline is very limited. I nowhave a list with ports in red on a tab called "802.1Q ports". Below the first
part
of this page (screenshot). Do I have to alter something to get the option to
manually set the VLANs on the ports?
provide the information.
If other information is needed please let me know so I can search for it and
On the screenshot the ports have no configuration controls under "new config".
This means the template assigned to the switch tells that those ports cannot
have a 802.1Q configuration.
That said, the ports do have a 802.1Q configuration A1 (access port in VLAN 1
under "last saved config"), which is the default configuration after the
manual
import. The interface detects this mismatch (a port should not have a 802.1Q
configuration but it does have it), that's why respective rows are red on the
screenshot.
You need to use a template that tells those ports can have a specific
configuration, for instance:
sequence: 100
regexp: #\d+#
role: user any mode
See "VLAN switch templates" on the same page for a more detailed description.