[python] Re: Trike Rear End
- From: Jürgen Mages <jmages@xxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Sun, 13 Feb 2005 22:43:57 +0100
Sorry for the late reply. Actually, I'm talking about the guy who built a
flevo clone and put a delta rear end on it with a horizontal pivot so he
could still lean into corners like a normal bike. I'm wondering if it's
necessary. I've been following Greg's since almost the beginning, but
it's
a little too complicated for my likes :)
Got you. That was Dirk Bonné with his flevo
http://dirkb.dnsalias.net/image/flevo08.jpg
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Juergen Mages jmages@xxxxxx
============================================================
- References:
- [python] Trike Rear End
- From: Jürgen Mages
- [python] Re: Trike Rear End
- From: 25hz
Other related posts:
- » [python] Trike Rear End
- » [python] Re: Trike Rear End
- » [python] Re: Trike Rear End
- » [python] Re: Trike Rear End
flevo clone and put a delta rear end on it with a horizontal pivot so he
could still lean into corners like a normal bike. I'm wondering if it's
necessary. I've been following Greg's since almost the beginning, but it's
a little too complicated for my likes :)
- [python] Trike Rear End
- From: Jürgen Mages
- [python] Re: Trike Rear End
- From: 25hz