[python] Re: First attempt at riding a python

Hi Jurgen and others

Thanks for the words of encouragement.

I joined the two forks by putting a sleeve inside the steerer tubes and
brazing it together.  I expect that this is a high stress joint so I may put
an external sleeve on as well.

Thanks for putting me up on the mod page.  I hope to report success at
taming the python soon!


Regards,

Mike Channon
London, Ontario, Canada

At 03:24 PM 3/9/04 +0100, you wrote:
>Hi Mike,
>
>nice to hear from your project.
>The rear suspension with two forks and one spring is a good
>idea. How did you connect the fork tubes?
>I have placed your bike on the mod page. Expect to hear some
>good news about your riding experiences soon ...
>
>Regards,
>
>Jürgen.

============================================================

This is the Python Mailinglist at freelists.org

Listmaster: Juergen Mages jmages@xxxxxx

============================================================

Other related posts: