[pure-silver] Re: Temp adjustment TMX
- From: "Breukel, C. \(HKG\)" <C.Breukel@xxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Mon, 18 Sep 2006 10:41:09 +0200
..and I found the .pdf ( so people were complaining about little trafic
on this list, ....so I managed to generate 3 posts, which could have
been easily one..;-)..)
Anyway: http://www.ilford.com/html/us_english/pdf/tempconv.pdf
Best,
Cor
> -----Original Message-----
> From: pure-silver-bounce@xxxxxxxxxxxxx [mailto:pure-silver-
> bounce@xxxxxxxxxxxxx] On Behalf Of Breukel, C. (HKG)
> Sent: maandag 18 september 2006 10:18
> To: pure-silver@xxxxxxxxxxxxx
> Subject: [pure-silver] Re: Temp adjustment TMX
>
> Oh I forgot to include the starting point: 11:30 at 70F would
translate
> to 8 min at 75F..
>
> Best,
>
> Cor
>
> > -----Original Message-----
> > From: pure-silver-bounce@xxxxxxxxxxxxx [mailto:pure-silver-
> > bounce@xxxxxxxxxxxxx] On Behalf Of Breukel, C. (HKG)
> > Sent: maandag 18 september 2006 10:15
> > To: pure-silver@xxxxxxxxxxxxx
> > Subject: [pure-silver] Re: Temp adjustment TMX
> >
> > Peter I use the Ilford temperature conversion chart which was on the
> > Ilford web site, I could not find it now, if you want it I can send
> you
> > the .pdf.
> >
> > It gives you a good starting point for these kind of situations,
> >
> > Best,
> >
> > Cor
> >
> > > -----Original Message-----
> > > From: pure-silver-bounce@xxxxxxxxxxxxx [mailto:pure-silver-
> > > bounce@xxxxxxxxxxxxx] On Behalf Of Peter De Smidt
> > > Sent: vrijdag 15 september 2006 19:10
> > > To: pure-silver@xxxxxxxxxxxxx
> > > Subject: [pure-silver] Temp adjustment TMX
> > >
> > > So I'm going to try some Pyrocat-HD to develop 4x5 tmx in a Jobo.
> > Sandy
> > > King recommended 11:30 minutes of development at 70F with the
> 2:2:100
> > > dilution. So far so good, except that I process everything at 75F
> to
> > be
> > > sure that I'm always processing above the ambient temp in my
> darkroom,
> > > and my calibrated thermometer is awol, and hence I don't really
want
> > to
> > > change temps. While I will run development tests, they will
> > > becomplicated since I don't have a densitometer that deals well
with
> > > pyro stains. So, can anyone suggest what time at 75F would give
> > > equivalent contrast to Sandy's recommendation at 70F?
> > >
> >
>
========================================================================
> > ==
> > > ===================================
> > > To unsubscribe from this list, go to www.freelists.org and logon
to
> > your
> > > account (the same e-mail address and password you set-up when you
> > > subscribed,) and unsubscribe from there.
> > ====================================To unsubscribe from this list,
go
> to
> > www.freelists.org and logon to your account (the same e-mail address
> and
> > password you set-up when you subscribed,) and unsubscribe from
there.
> ====================================To unsubscribe from this list, go
to
> www.freelists.org and logon to your account (the same e-mail address
and
> password you set-up when you subscribed,) and unsubscribe from there.
============================================================================================================To
unsubscribe from this list, go to www.freelists.org and logon to your account
(the same e-mail address and password you set-up when you subscribed,) and
unsubscribe from there.
Other related posts:
