[pure-silver] Re: Flooded print
- From: "Nicholas O. Lindan" <nolindan@xxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Thu, 3 Jun 2010 12:17:53 -0500
"Go not to the elves for advice - for they will say both 'yes' and 'no'."
From my experience with old crudded black and white prints ... and if yours
is RA4 it isn't
'old', but new.
I would flush the surface of the print under flowing water and remove the
dirt first with a brush
(such as a house-painting trim brush) and then, after all the big stuff is
removed, with a sopping
wet paper towel. Hang to dry.
The emulsion may loosen if the print spent long periods of its life under
water
Nicholas O. Lindan
Cleveland Engineering Design, LLC
Cleveland, Ohio 44121
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
