[pure-silver] Exposing and developing 8x10 Fuji Provia 100 transparency film??

  • From: Bogdan Karasek <bkarasek@xxxxxxxxxxxx>
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Sun, 04 Oct 2015 22:00:42 -0400

Hello,

I was cleaning a stack of 8x10 double sided film holders and found one that still had a sheet of film in it, 8x10 Fuji Provia 100 transparency film. I last shot Provia 3 years ago and this one sheet did not get exposed. It's been sitting in the basement, adjacent to the darkroom, at room temperature 70°/80°, depending on the season (darkroom is airconditioned 68°), so the question is, how I should expose the film. Will a standard reading off a 18% grey card be alright, or should I overexpose, and if so, by how much?

Regarding developing, I'm taking it to the lab that still does 8x10 transparency film. What instructions should I give them?

I know, it's just one sheet of film, but it is a gorgeous film, the colors are very natural, not saturated., so I would hate to waste it.. and I'll be up on the roof in the next few days, and want to take the shot from up there.

Thanks in advance,

Bogdan
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.

Other related posts: