[pskmail] SERVER 1.4.8
- From: "DAVID GRAY" <kf4wbs@xxxxxxxxxxx>
- To: <pskmail@xxxxxxxxxxxxx>
- Date: Tue, 27 Sep 2011 14:21:15 -0500
WE DON'T HAVE ERROR MESSAGES ANYMORE BUT IT WONT SWITCH MODES
I HAVE
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
10146500,10146500,10146500,10146500,
THOR22,THOR22,THOR22,THOR22,THOR22,
USB,USB,USB,USB,USB,USB,
THE PSKMAILRC.PL FILE FOR DEFAULT MODE IS THOR22
THE TABLE IS WORKING SETTING THE FREQUENCY
BUT THE MODE IS ALWAYS PSK500R EXCEPT UPON RECEIPT OF TXID
THEN IT WILL SWITCH MODES WE CANNOT SET IT TO BEACON AT THOR22
IN THE PAST WE HAVE SEEN HERE THAT THOR22 IS THE DEFAULT
MODE IN HIGH NOISE AREAS A LOT OF TIMES
THE STATION MISSES THE TXID FROM THE CONNECTING
STATION WHEN CONDITIONS ARE NOT GOOD
HOWEVER WILL CONNECT AND PASS TRAFFIC BECAUSE
IT WAS PRESET TO THE CONNECTION MODE OF THOR22
IT DOES NOT MAKE THE FRAME SIZE ANY SMALLER HOWEVER
THAT INFORMATION UNDER POOR CONDITIONS IS NOT REQUIRED
BECAUSE WE ARE ALWAYS SET TO OPERATE UNDER MED TO POOR
CONDITIONS
IS THERE A FIX ?
DAVID KF4WBS
Other related posts:
