[pskmail] Re: FLDidi server RxID problem - more information.
- From: John Douyere <vk2eta@xxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Sun, 31 Jan 2010 20:23:59 +1100
Steve,
In the configuration tab titled "IDs", make sure you have all the
boxes for RSID UNchecked.
Maybe you have "detector disables RSID" ticked.
Regards,
John
On Sun, Jan 31, 2010 at 7:25 PM, Steve <stevez@xxxxxxxxxx> wrote:
> Thanks Rein.
> Can I just ask one simple question to the wider group?
> Has anyone checked their server and noticed that RxID was turned off (when
> it should have been on) at all?
>
> I rebooted my server a couple of hours ago and when it came back up, the
> server's FLDigi had RxID on.
> I just checked it right now, and it was off again. The last thing in
> FLDigi's console is "Before RSID: <<2010-01-31T08:08Z BPSK-250 @
> 3580000+1000>>".
> Is this is a request to change modes? I can't see any callsigns associated
> with it.
> I will turn RxID back on, but rest assured, it will be off again soon!
>
> Is this only happening to me? If so, I will start looking at what makes my
> setup different to a typical install.
> We'll crack it!
> Steve (VK2ZSZ)
>
>
>
> On 01/31/2010 02:01 PM, Rein Couperus wrote:
>>
>> Hmmm, this does not happen on PI4TUE...
>> will do some more testing next week.
>>
>> Rein
>>
>>
>>
>>>
>>> Hello all,
>>>
>>> I think I can reproduce the server RxID problem.
>>>
>>> Here's how :-
>>>
>>> Connect with BPSK250 (mode might not be important, but that's what I
>>> have tested).
>>>
>>
>> Indeed, the mode is unimportant... could be any mode.
>>
>>
>>>
>>> Server RxID goes off.
>>> Hit abort on client (not quit).
>>> Client goes into "listening" mode.
>>> Server still polls. After a few attempts (that the client ignores), it
>>> switches to BPSK250R.
>>> After another few polls, the server gives up and RxID goes on.
>>>
>>
>> This is all ok..
>>
>>
>>>
>>> Now, if I wait a while, the client will beacon. After the beacon, the
>>> server will turn off RxID, and transmit the QSL response. RxID does not
>>> come back on.
>>>
>>
>> This should not happen, rxID must remain on. Works ok on PI4TUE...
>>
>>
>>>
>>> I've tried turning RxID on the server on, and then doing a manual beacon
>>> on the client. That didn't seem to trigger the problem.
>>>
>>> I'll keep testing, but there is definitely something amiss with the
>>> server RxID stuff on my setup.
>>>
>>> Client and server are the latest alpha releases. Both FLDigi installs
>>> are 3.13BT.
>>>
>>> Nothing in the server log looks out of order.
>>>
>>> Steve (VK2ZSZ)
>>>
>>>
>>>
>>
>>
>
>
>
Other related posts:
