[pskmail] Re: Default mode PSK 250 with pskmail server 1.0.32
- From: "Rein Couperus" <rein@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Sun, 16 Jan 2011 17:17:56 +0100 (CET)
Hi, I did some experiments here, and 1.0.28 went to PSK250, and 1.0.32 did not.
A diff did not reveal the cause, so it looks like it needs some work,,,
I will have time for that as soon as I am in Spain...
73,
Rein F/PA0R/M
>Hi,
>
>Well, if you look at rflinkserver.pl then at the start of that its
>setting a default mode. That mode is:
>
>my $modem = "PSK500R";
>setmode ($modem);
>
>So, it should start out as PSK500R but as soon as it starts the scan
>loop (which takes abt 30 seconds or so) it should set the modes from the
>freqs.txt file. Can you change the frequencies in that file so that you
>can be sure that it reads it and tries to set the modes?
>
>
>73 de Per, sm0rwo
>
>
>
>2011-01-16 14:24, Sébastien RADUGET skrev:
>>
>> Hi
>>
>>
>> It was a typo in my mail.
>> The file is freqs.txt and he is found at stat up.
>>
>> 73 de Seb F8COJ
>>
>> Le 16/01/2011 13:47, Pär Crusefalk a écrit :
>>>
>>> Hi,
>>>
>>> Just a check, it may be a typo in the email but you mentioned
>>> fresq.txt and in pskmailrc.pl you have freqs.txt. If its set that way
>>> then it would probably behave like what you are seeing.
>>> Can you see that it succeeds in finding the freqs.txt file after startup?
>>>
>>> 73 de Per, sm0rwo
>>>
>>>
>>>
>>> ----- Ursprungsmeddelande -----
>>> > Hi
>>> >
>>> >
>>> > Why in PSK250 ? Ijust wanted tomakesome testsonpsk25010,148.
>>> >
>>> > "Is theproblemThat YouReceiveatransmissionPSK500RThat ChangeWithRSID
>>> > Themodeinfldigi?"
>>> >
>>> > No,whenIstarttheserver,itgoesdirectlypsk500R.
>>> >
>>> > I also havean errorinthe console:
>>> >
>>> >
>>> > 10:44 UTC Jan-16-2011:
>>> > Send>APRS-IS:F8COJ-9>PSKAPR:@161044z4840.84NP00629.37E&PSKmail 1.0.32
>>> > server VALHEY dpt 54
>>> >
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> > sh: Syntax error: "(" unexpected
>>> >
>>> > Now i'm in 10.147 with psk500R.
>>> >
>>> > Thanks.
>>> >
>>> >
>>> > Regards.
>>> >
>>> >
>>> > F8COJ / Sébastien
>>> >
>>> >
>>> >
>>> > Le 16/01/2011 12:23, Pär Crusefalk a écrit :
>>> > > Hi,
>>> > >
>>> > > On frequency change it should set the proper mode (PSK250 here).
>>> Is the
>>> > > problem that you receive a PSK500R transmission with RS ID that
>>> changes
>>> > > the mode in fldigi?
>>> > >
>>> > > Also, somewhat curious. Why use PSK250?
>>> > >
>>> > > 73 de Per, sm0rwo
>>> > >
>>> > > sön 2011-01-16 klockan 09:23 +0100 skrev Sébastien RADUGET:
>>> > > > Hello
>>> > > >
>>> > > >
>>> > > > Thank you for your reply.
>>> > > > I changed the settings.
>>> > > > But I have the same result.
>>> > > > In fresq.txt i have :
>>> > > >
>>> > > > 10148000,10148000,10148000,10148000,10148000
>>> > > > PSK250,PSK250,PSK250,PSK250,PSK250,
>>> > > >
>>> > > >
>>> > > > and at the end of pskmailrc.pl i have :
>>> > > >
>>> > > > $scanner = "S";
>>> > > > $qrgfile = "$ENV{HOME}/.pskmail/qrg/freqs.txt";
>>> > > > $freq_offset = 0;
>>> > > > @freq_corrections = qw (-1000 -1000 -1000 -1000 -1000);
>>> > > > $traffic_qrg = 0;
>>> > > > $Defaultmode = "PSK250";
>>> > > > $MARS = 0;
>>> > > > 1;
>>> > > >
>>> > > > Fldigi automatically changes the mode to PSK500R.
>>> > > >
>>> > > > I use version 3.20.34 fldigi.
>>> > > >
>>> > > >
>>> > > > Regards.
>>> > > >
>>> > > >
>>> > > >
>>> > > > Sebastien / F8COJ
>>> > > >
>>> > > >
>>> > > > Le 15/01/2011 09:21, Rein Couperus a écrit :
>>> > > > > Iin ~/,pskmail/pskmailrc.pl cahnge defaultmode to PSK250
>>> > > > > Use scanner = 'S';
>>> > > > >
>>> > > > > in ~/.pskmail/qrg/freqs.txt change modes ffrom PSK500R to PSK250.
>>> > > > >
>>> > > > > On 10147.0 we use default PSK500R, on 10148.0 we use PSK250...
>>> > > > >
>>> > > > > 73,
>>> > > > >
>>> > > > > Rein PA0R
>>> > > > >
>>> > > > > -----------------------------------------------------------
>>> > > > > Hello
>>> > > > >
>>> > > > > I use version 1.0.32 server pskmail.
>>> > > > > The default mode used is psk500R.
>>> > > > > I want to use the default mode PSK250.
>>> > > > > I can not perform this configuration.
>>> > > > > Will you help me?
>>> > > > >
>>> > > > > Regards.
>>> > > > >
>>> > > > > F8COJ / Sebastien
>>> > >
>>> > >
>>> > >
>>> >
>>>
>>
>
>
Other related posts:
