[pradjs] Re: Technical issue
- From: Graham Barry <lepue22@xxxxxxxxx>
- To: PRA DJ's <pradjs@xxxxxxxxxxxxx>
- Date: Sat, 18 Sep 2010 13:09:37 -0700 (PDT)
I haven't found a buzzing with the CD's during my set. However... the
turntable mixer is coming through like shit - sounds like maybe it's the wiring
to the sound board, because it sounds okay through the headphones plugged
directly into the mixer. The wiring under the desk going to the main sound
board looks like it's seen much better days (frayed wires all taped up).
Anyway, if you plan on using that mixer for your show, be warned...
Besides all that, one of the speakers in the studio is dead again. Don't know
if there's any money left from the benefit, but if so, maybe we could get a
couple cheap back-up speakers from Goodwill or something? Seems like one of
these speakers is almost always konked out.
-graham
--- On Sat, 9/18/10, Noah Fence <itsaniceworldtovisit@xxxxxxxxxxx> wrote:
From: Noah Fence <itsaniceworldtovisit@xxxxxxxxxxx>
Subject: [pradjs] Technical issue
To: "PRA DJ's" <pradjs@xxxxxxxxxxxxx>
Date: Saturday, September 18, 2010, 9:17 AM
Cd 1 on the board is causing a lot of "buzzing" when music is being played.
There may be other issues.
Just a heads up
Jeff Ross (Noah Fence)
"It's a nice world to visit"
9:00 a.m. to noon PST Saturdays
Helping to make Portland the internet destination of choice since 2006
www.praradio.org
Other related posts:
