The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#4238) Re: Identical phorm, not working. <http://www.phorm.com/support/?rev=4238> AUTHOR: Holotech DATE: August 6, 2004 at 11:35 a.m. EST Reply To: (#4237) Identical phorm, not working. Author: Mark Date: August 6, 2004 at 8:48 a.m. EST > My working version is here > http://www.pixelpyro.co.uk/php/eden/ and the exact > copy with error is http://www.edenhouse.co.uk/eden/ I don't see that either of them works, as there is no submit button. > My host did take a look and altered the following code > -------------------- > I made a change to the phormjr.php3 file as it was > clearly not calling the correct form variables. This comment suggests to me that your new host has register_globals turned off in their PHP configuration. Check if that is the case. Phorm Jr. requires it to be on. I will change that eventually, but I don't anticipate working on Jr. in the near future. The full version of Phorm can work with register_globals off; if you're comfortable working with Jr., you should have no problem moving up to Phorm. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.