At 04:28 PM 7/19/2003, you wrote: >Does anyone know why a U.S. Robotics 56k V90-V92 Winmodem wouldn't release >a telephone line after disconnecting? The connection definitely >disconnects, but there is no dial tone on the phone afterwards unless you >unplug the jack at the wall and plug it back in. If you immediately try >to reconnect dial-up, you get a message that there is no dial tone. The >modem is a little over a year old and it did not start doing this until a >few months ago. It's not my computer (I'm on cable modem), but I've never >heard of this problem and it bugs me. Sounds like the DTR is not being dropped. Adding a command such as &D2 will do it. One may also need to adjust an S registry. On some modems a S registry command such as S25=3 or some USR modems S10=3 may help. To unsub or change your email settings: //www.freelists.org/webpage/pctechtalk To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/ For more info: //www.freelists.org/cgi-bin/list?list_id=pctechtalk