By LinuxDevices.com Staff June 27, 2006 As predicted, the open-source community has come up with a way to convert VxWorks-based Linksys wireless WRT54G routers to Linux. The process does not require hardware hacking and installs a recent version of "DD-WRT micro." A version of Linux that supports the VxWorks-based "series 5" WRT54G has been available since April, when the DD-WRT project created its "micro" edition, with a 1.7MB footprint. However, the firmware could only be installed on routers modified to expose their JTAG ports (complicated instructions here). Now, Jeremy Collake, aka "db90h," appears to have created a "VxWorks Killer" flash image that overwrites the VxWorks bootloader on series 5 WRT54G routers with normal Broadcom CFE firmware. This then enables the device to be put into maintenance mode at startup, after which Linux firmware can be installed easily. More here: http://www.eweek.com/article2/0,1895,1982278,00.asp -- Regards, John Durham <http://modecideas.com/contact.html?sig> ICQ number 112663246 Fax/Phone 64 4 5286786 Award winning web site at http://modecideas.com?sig PC-HELPERS list subscribe/unsub at http://modecideas.com/index.html?sig Good advice is like good paint- it only works if applied. -- -------list-services-below----------- Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig> Freelists login at //www.freelists.org/cgi-bin/lsg2.cgi List archives at //www.freelists.org/archives/pchelpers PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig Latest news live feeds at http://modecideas.com/indexhomenews.htm?sig Good advice is like good paint- it only works if applied.