Re: ocssd.bin does not start after 10.2.0.1 clusterware install
- From: Kumar Madduri <ksmadduri@xxxxxxxxx>
- To: Martin Berger <martin.a.berger@xxxxxxxxx>
- Date: Fri, 4 Sep 2009 11:11:47 -0700
Hi Martin
We have done this. This was as part of the note given in ML for cleanup.
Does not help.
On Thu, Sep 3, 2009 at 9:25 PM, Martin Berger <martin.a.berger@xxxxxxxxx>wrote:
> Kumar,
>
> have you checked /var/tmp/.oracle for old 'files'?
> I had to clear these manually (of course all the crs-binaries must be down)
> when I play with ocssd.
>
> HTH
> Martin
>
> Am 03.09.2009 um 22:37 schrieb Kumar Madduri:
>
>
> Hi
>> We have a suncluster on top of which we are trying to install the 10.2.0.1
>> clusterware. The installation is fine but when you run root.sh it fails to
>> bring ocssd.bin. I think it is looping at /etc/init.d/init.cssd trying to
>> validate the conditions under the SunOS case statement and it keeps looping
>> (start check process start and it does not go to the next stage).
>> Prior to doing this install, we clean up the localconfig as per note
>> 239998.1.
>>
>> cluvfy does not report any issues before the start of the installation.
>>
>> We have a tar with Oracle but there is not much progress with them
>> unfortunately.
>>
>> Any ideas?
>>
>> Thank you
>> Kumar
>>
>>
>
Other related posts:
