[opendtv] Re: PCI 5th gen test
- From: Doug McDonald <mcdonald@xxxxxxxxxxxx>
- To: opendtv@xxxxxxxxxxxxx
- Date: Sat, 28 May 2005 14:04:42 -0500
Tom Barry wrote:
> The percentage numbers don't always seem to be equally meaningful.
On my Motorola box, 100% signal means just barely enough
signal to get, a margin of near zero dB.
75% signal means a margin of, if I recall correctly,
about 20 dB. 50% signal means an extremely strong
signal. It never gets lower that, even with a
very strong signal.
Doug McDonald
----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:
- Using the UNSUBSCRIBE command in your user configuration settings at
FreeLists.org
- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word
unsubscribe in the subject line.
- References:
- [opendtv] PCI 5th gen test
- From: Bob Miller
- [opendtv] Re: PCI 5th gen test
- From: Tom Barry
Other related posts:
- » [opendtv] PCI 5th gen test
- » [opendtv] Re: PCI 5th gen test
- » [opendtv] Re: PCI 5th gen test
- » [opendtv] Re: PCI 5th gen test
- » [opendtv] Re: PCI 5th gen test
- » [opendtv] Re: PCI 5th gen test
- [opendtv] PCI 5th gen test
- From: Bob Miller
- [opendtv] Re: PCI 5th gen test
- From: Tom Barry