1 new commit in StationPlaylist:
https://bitbucket.org/nvdaaddonteam/stationplaylist/commits/75934c2930c3/
Changeset: 75934c2930c3
Branch: stable
User: josephsl
Date: 2015-07-29 08:28:16+00:00
Summary: Readme for 5.2
Affected #: 1 file
diff --git a/readme.md b/readme.md
index 066b52c..3293ca8 100755
--- a/readme.md
+++ b/readme.md
@@ -45,6 +45,7 @@ The following commands are available when using Sam or SPL
encoders:
* F9: connect to a streaming server.
* F10 (SAM encoder only): Disconnect from the streaming server.
+* Control+F9/Control+F10 (SAM encoder only): Connect or disconnect all
encoders, respectivley.
* F11: Toggles whether NVDA will switch to Studio window for the selected
encoder if connected.
* Shift+F11: Toggles whether Studio will play the first selected track when
encoder is connected to a streaming server.
* Control+F11: Toggles background monitoring of the selected encoder.
@@ -90,7 +91,7 @@ The available SPL Controller commands are:
* Press L to enable line-in input or Shift+L to disable it.
* Press R to hear remaining time for the currently playing track in seconds.
* Press Shift+R to get a report on library scan progress.
-* Press E to get a count of encoders being monitored.
+* Press E to get count and labels for encoders being monitored.
* Press F1 to show a help dialog which lists available commands.
## End of track alarm
@@ -129,6 +130,14 @@ From studio window, you can press Control+NVDA+0 to open
the add-on configuratio
If you are using Studio on a touchscreen computer running Windows 8 or later
and have NVDA 2012.3 or later installed, you can perform some Studio commands
from the touchscreen. First use three finger tap to switch to SPL mode, then
use the touch commands listed above to perform commands.
+## Changes for 5.2
+
+* NVDA will no longer allow both settings and alarm dialogs to be opened. A
warning will be shown asking you to close the previously opened dialog before
opening another dialog.
+* When monitoring one or more encoders, pressing SPL Controller, E will now
announce encoder count, encoder ID and stream label(s) if any.
+* NVDA supports connect/disconnect all commands (Control+F9/Control+F10) in
SAM encoders.
+* NVDA will no longer play the next track if an encoder connects while Studio
is playing a track and Studio is told to play tracks when an encoder is
connected.
+* Updated translations.
+
## Changes for 5.1
* It is now possible to review individual columns in Track Tool via Track Dial
(toggle key unassigned). Note that Studio must be active before using this mode.
Repository URL: https://bitbucket.org/nvdaaddonteam/stationplaylist/
--
This is a commit notification from bitbucket.org. You are receiving
this because you have the service enabled, addressing the recipient of
this email.
