[nas-2000] Re: Serial cable connection
- From: philipp Wehrheim <flipstar@xxxxxxx>
- To: nas-2000@xxxxxxxxxxxxx
- Date: Sat, 11 Aug 2007 18:33:19 +0200
Dennis Suchomsky wrote:
> Am Samstag, den 11.08.2007, 18:12 +0200 schrieb philipp Wehrheim:
>> Dennis Suchomsky wrote:
>>> OK one more thing....
>>> I can't send Output therefore i can't interupt the Boot progress.
>> do you want to save the hole output of the bootprocess?
>> you can enable minicom-logging and then simply scroll back to the
>> relevant parts
>>
> No sorry the Problem is that when I hit ctrl+C the NAS doesn't recieve
> the command.
you want to send CRTL+c to the bootloader?
The rc-scripts starts when
Mounting proc filesystem...
is printed so after that point you should be able to press/send CRTL+c
>
>>> Sorry for bothering you so often but I promise Im going to write a Howto
>>> for the Wiki out of this ;)
>>> bye
>>> Dennis
>>>
>>>
>>>
>
>
Other related posts:
