You might also want to check your router memory and process load. I have attached screen shots of mine to show you where to look... G. On Thu, Jan 22, 2015 at 12:35 AM, George Lambert <marchon@xxxxxxxxx> wrote: > According to the openwrt platforms list the mips processors > can be either *Bigendian or Littleendian. * > > I was having a discussion yesterday what this means for both > the compile and execution. The second concern that I might > have is what the processor and available memory is on your > server. > > -- If you wish to get the model number of your router and the current > version of openwrt > I would enjoy doing a little bit more research for you. > > https://dev.openwrt.org/wiki/platforms > > > here is a short example of the full list of devices on that link. > > *Target name**Platform**Architecture**Endianness**Developer(s)**Known > Issues/Notes*adm5120Infineon/ADMtek ADM5120MIPSbig/littleflorian > <https://dev.openwrt.org/wiki/florian>, juhosg > <https://dev.openwrt.org/wiki/juhosg>adm5120 > <https://dev.openwrt.org/wiki/adm5120>adm8668Infineon/ADMtek ADM8668MIPS > littleflorian <https://dev.openwrt.org/wiki/florian>adm8668?ar7Texas > Instruments AR7MIPSbig/littleflorian > <https://dev.openwrt.org/wiki/florian>ar7 > <https://dev.openwrt.org/wiki/ar7>ar71xxAtheros AR71xx/AR724x/913xMIPSbig > juhosg <https://dev.openwrt.org/wiki/juhosg>, Kaloz > <https://dev.openwrt.org/wiki/Kaloz>ar71xx > <https://dev.openwrt.org/wiki/ar71xx>at91Atmel AT91ARMlittlehcg > <https://dev.openwrt.org/wiki/hcg>,claudio > <https://dev.openwrt.org/wiki/claudio>at91 > <https://dev.openwrt.org/wiki/at91>atherosAtheros AR231x/5312MIPSbignbd > <https://dev.openwrt.org/wiki/nbd>, Kaloz > <https://dev.openwrt.org/wiki/Kaloz>atheros > <https://dev.openwrt.org/wiki/atheros>au1000RMI/AMD Alchemy 1500/1550MIPS > littleflorian <https://dev.openwrt.org/wiki/florian>, nico > <https://dev.openwrt.org/wiki/nico>au1000 > <https://dev.openwrt.org/wiki/au1000>avr32Atmel AT32AP7000AVR32bigKaloz > <https://dev.openwrt.org/wiki/Kaloz>avr32 > <https://dev.openwrt.org/wiki/avr32>brcm-2.4Broadcom BCM47xx/53xxMIPS > littlenbd <https://dev.openwrt.org/wiki/nbd>, pavlov > <https://dev.openwrt.org/wiki/pavlov>brcm-2.4 > <https://dev.openwrt.org/wiki/brcm-2.4>brcm2708Broadcom BCM2708ARMlittle > florian <https://dev.openwrt.org/wiki/florian>brcm2708 > <https://dev.openwrt.org/wiki/brcm2708>brcm47xxBroadcom BCM47xx/53xxMIPS > littlenbd <https://dev.openwrt.org/wiki/nbd>, mbm > <https://dev.openwrt.org/wiki/mbm>, pavlov > <https://dev.openwrt.org/wiki/pavlov>brcm47xx > <https://dev.openwrt.org/wiki/brcm47xx>brcm63xxBroadcom BCM63xxMIPSbig > florian <https://dev.openwrt.org/wiki/florian>, cshore?, jogo > <https://dev.openwrt.org/wiki/jogo>brcm63xx > <https://dev.openwrt.org/wiki/brcm63xx>cns3xxxCavium Networks CNS3xxxARM > bigKaloz <https://dev.openwrt.org/wiki/Kaloz>cns3xxx?cobaltCobalt > MicroserversMIPS32/64littleflorian <https://dev.openwrt.org/wiki/florian> > cobalt <https://dev.openwrt.org/wiki/cobalt>ep93xxCirrus Logic EP93xxARM > littleflorian <https://dev.openwrt.org/wiki/florian>ep93xx > <https://dev.openwrt.org/wiki/ep93xx>imx23Freescale i.MX23 seriesARMlittle > wigyori <https://dev.openwrt.org/wiki/wigyori>iop32xIntel IOP32xARMlittle > Kaloz <https://dev.openwrt.org/wiki/Kaloz>iop32x > <https://dev.openwrt.org/wiki/iop32x>ixp4xxIntel IXP42xARMbigKaloz > <https://dev.openwrt.org/wiki/Kaloz>, rwhitby > <https://dev.openwrt.org/wiki/rwhitby>ixp4xx > <https://dev.openwrt.org/wiki/ixp4xx>geminiCortina CS351x (StormSemi > SL351x)ARMlittleKaloz <https://dev.openwrt.org/wiki/Kaloz>gemini > <https://dev.openwrt.org/wiki/gemini>kirkwoodMarvell MV88F61xx/MV88F62xx > ARMlittleKaloz <https://dev.openwrt.org/wiki/Kaloz>kirkwood > <https://dev.openwrt.org/wiki/kirkwood>lantiqLantiq FALC-ON/XWAYMIPSbig & > littleblogic?lantiq?2magicboxAMCC PowerPC 405PowerPCbignbd > <https://dev.openwrt.org/wiki/nbd>, Kaloz > <https://dev.openwrt.org/wiki/Kaloz>magicbox > <https://dev.openwrt.org/wiki/magicbox>1 > > > > > On Wed, Jan 21, 2015 at 8:08 PM, Santiago Regusci <santicomp2@xxxxxxxxx> > wrote: > >> Hi has anybody tried to compile nanomsg on openwrt. >> or have an idea how i could create a makefile >> >> thanks >> > > > > -- > P THINK BEFORE PRINTING: is it really necessary? > > This e-mail and its attachments are confidential and solely for the > intended addressee(s). Do not share or use them without approval. If > received in error, contact the sender > and delete them. > -- P THINK BEFORE PRINTING: is it really necessary? This e-mail and its attachments are confidential and solely for the intended addressee(s). Do not share or use them without approval. If received in error, contact the sender and delete them.
Attachment:
Screen Shot 2015-01-22 at 12.36.25 AM.png
Description: PNG image
Attachment:
Screen Shot 2015-01-22 at 12.37.53 AM.png
Description: PNG image
