[modeleng] Re: [modeleng]cast iron filler rod
- From: john.burridge@xxxxxxxxxx
- To: modeleng@xxxxxxxxxxxxx
- Date: Sun, 22 Apr 2007 10:04:55 +0200 (CEST)
Dave Hi,
Thanks for the reply i am in South Oxfordshire.
I would like either 1/8" or 1/4" but a little larger would not matter,I can
either gas weld or Tig what i want to repair.
How much does small amounts cost these days?
When i used to live near Birmingham i could get almost anything either through
Land Rover when i was an apprentice through their buying office or from brum or
the black country, alas most of the industry and suppliers now gone!!!
I can get hold of most of the unusall materials ie:magnesium,titanium,and all
the common used steels and aluminium,but with racing cars we dont use cast iron
anywhere.
speak to you again.
Regards John Burridge Tel No 01491-833009
> Message Received: Apr 22 2007, 12:00 AM
> From: "Dave Beaman" <davebeaman@xxxxxxxxxxxxxxxx>
> To: modeleng@xxxxxxxxxxxxx
> Cc:
> Subject: [modeleng] Re: [modeleng]cast iron filler rod
>
> Sorry John, I used my last 2 last monday on my mates pot bellied stove. I
> will be able to get some mor but how soon do you need them?
> and what size? The other thing is, where are you?, will need to post them!
>
> Regards,
> Dave
>
>
>
> ----- Original Message -----
> From: <john.burridge@xxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Saturday, April 21, 2007 10:26 PM
> Subject: [modeleng] Re: [modeleng]cast iron filler rod
>
>
> Hi to all,
> Does anyone have any cast iron filler rod, I am having difficulty in buying
> a small quanity of filler rod to repair a casting would anyone have a stick
> or two they might like to sell.
>
> yours John Burridge
>
>
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
>
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
