[modeleng] Re: Winson boilers
- From: "BarriePurslow" <Barrie@xxxxxxxxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Mon, 24 Jan 2005 16:46:13 -0000
Andy,
They used different boilers - the 9F boiler backhead is not as high as the
Britannia. (The rear drivers on the 9F take up more vertical space than the
Britannia's pony truck).
The distance between upper and lower gauge glass bush centres is 1&7/8 ins.
on the Britannia and I would expect the 9F to be very similar. One things
for sure - they won't be parallel to each other!!
Regards,
Barrie
----- Original Message -----
From: "Andy A" <AndyA@xxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Sunday, January 23, 2005 8:46 PM
Subject: [modeleng] Winson boilers
> Hi All
> Did Winson/Modelworks use the same boiler on both the 9F and Britannia? Im
trying to find out what the distance is between the top and bottom gauge
glass fittings.
> Andy
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.7.2 - Release Date: 1/21/05
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.7.2 - Release Date: 1/21/05
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
